How to fix the Zebra Label Printer Issues?
Here are the troubleshooting steps you need to follow:
- Use the button present on the side of the Zebra printer to open the printer. The exact location of the button will vary from model to model. In case you find difficulty in finding it, visit the official Zebra Website.
- Remove label rolls from inside of the printer. Be careful while removing the jammed labels which might be stuck inside of the printer. Check for locations where the label loses from the backing. The label where backing has some loose must be discarded.
- Clean the printer interior by using a cotton swab. Swap out the inside of the Zebra printer very carefully by using a cotton swab or clean cloth. Make sure that the printer is properly clean from the insider before you proceed further.
- Replace the label rolls or insert the new roll. Check and make sure that the first label edge must extend and carefully close the window. Print the test label and also make sure that your printer is working properly.
- For an updated driver, check the Zebra website. If the printer is not recognizing the computer, the driver might be outdated or corrupted. Download the printer drivers and run the setup program. Try to print again.
Article source: https://article-realm.com/article/Business/Customer-Service/3780-How-to-fix-the-Zebra-Label-Printer-Issues.html
Comments
Post a Comment