Simple and Easy Steps to Complete Epson sx235w WiFi Setup

Epson is a leading brand among the printers. Epson sx235w printer is available with ultimate features that gives you a smooth printing experience. If you are looking for the simple steps for Epson sx235w WiFi Setup then you have landed in the right place. The setup procedure of Epson sx235w is very easy, you can use the installation CD to complete the setup. But if in case you lost the installation CD then don’t worry as this blog will assist you with the setup. Without taking much time, let’s get started with the setup procedure of Epson sx235w. 

 

Simple steps to set up Epson sx235w printer

Follow the below-mentioned steps to setup Epson sx235w printer:

Step 1: In the first step, connect your Epson sx235w printer to the power socket and press the power button to turn it on.

Step 2: Then, go to the control panel of the Epson sx235w printer and press the home button.

Step 3: After this, use the arrow button to select the WiFi setup option and hit on the ok button.

Step 4: You need to press the ok button until you see the network selection.

Step 5: Now, you need to select the WiFi setup wizard option and then tap on the ok button.

Step 6: Once the system is done with the scanning of the Wireless network, a list of all available networks will display on your screen. Select the wireless network from the list.

Step 7: If the wireless network is not open then you need to enter the password for your WiFi network to connect the Epson sx235w printer to the WiFI network.

Step 8: Once you see a connection confirmation message on your screen, click on the ok button.

Step 9: Finally, your Epson sx235w printer is successfully connected to the wireless network.

 

Simple steps to set up the Epson sx235w printer through the WPS button

Go through the below-mentioned steps to setup Epson sx235w printer through the WPS button:

Step 1: First and foremost, connect your Epson sx235w printer to the power socket and then turn it on.

Step 2: After that, press the WPS button on your Epson sx235w printer, hold it for 5-7 seconds and then release the button.

Step 3: Then, a LED light will start flashing on the Epson sx235w printer.

Step 4: Now, locate the WPS button on the modem or printer and press it.

Step 5: You need to wait for some time until your Epson sx235w printer is connected to the wireless network.

Step 6: A stable green LED light on the device will indicate that the device is connected to the wireless network successfully.

Step 7: Next, follow the on-screen instructions to make the basic and advanced changes in the device as per your requirements.

Step 8: Finally, click on the info button and start printing the documents.

 

Congratulations! You have successfully completed the Epson sx235w WiFi Setup. Follow the above steps to set up the Epson sx235w printer and enjoy flawless printing.